Oribe

RESOURCECrafts Glossary

A

Abura-nuki (Oil draining)
- Wood & Bamboo
- Technique
The process of removing excess oil and water from green bamboo when making bamboo materials. There are two methods: “dry”, which uses a charcoal fire or gas burner, and “wet,” which uses boiling water to boil. The dry type, which increases the durability of bamboo, is suitable for materials such as bamboo fences, and the wet type, which makes the bamboo pliable, is suitable for intricate weaving.
Read More
Ai-zome (Indigo dye)
- Textiles
- Wood & Bamboo
- Leather
- Technique
A dyeing technique using indigo, a plant-derived dye. It is said to be the oldest dye known to mankind. In Japan it spread to the common people during the Edo period (1603-1868). Different plants are used as raw materials around the world, but in Japan, the main source is tade-ai or Japanese indigo plants from the knotweed family, of which Tokushima Prefecture is a major producer. The color does not fade easily, and it also has deodorizing and insect repellent effects.
Read More
Aizu-tamamushi-nuri
- Lacquerware
- Technique
A lacquerware technique originating in Sendai, Miyagi Prefecture. After the wood substrate is coated with a base coat, silver powder is sprinkled on top, after which transparent lacquer with dye is applied to create a glossy color and luster like the wings of a jewel beetle (tamamushi).
Read More
Aizu lacquerware
- Lacquerware
- Generic term
A general term for lacquerware produced in the Aizu region of Fukushima Prefecture. The planting of Japanese lacquer began in the Muromachi period (1333-1573) and developed into an industry after the Azuchi-Momoyama period (1573-1603). In addition to maki-e and chinkin, there are also a variety of other lacquerware techniques, such as Aizu-e with auspicious patterns, tetsu-sabi-nuri with sabi-urushi (literally, “rusted lacquer”), kinmushikui-nuri with patterns made with rice or barley husks, kijiro-nuri which brings out the best in the grain of the wood, and hana–nuri with a luster created by applying a mixture of transparent lacquer and oil.
Read More
Ana-gama
- Ceramics
- Others
A distinctive type of kiln, introduced to Japan from the Korean Peninsula in the 5th century along with the Sue ware technique. Some ana-gama kilns were dug into a slope with only a ceiling constructed above, and others were dug into the ground – giving rise to the name, which literally means “cave kiln.” This enables ana-gama kilns to fire at high temperatures.
Read More
Arita ware
- Ceramics
- Generic term
Generic name of porcelain made mainly in Arita, Saga Prefecture. Arita is the first porcelain producing area in Japan. It is also called “Imari ware” as it was shipped from Imari port during the early days.
Read More

B

Baren
- Other
- Others
A tool used when rubbing the paper on an inked wood block in order to apply pressure and transfer the paints onto the paper. It consists of “ategawa” (a flat pad), “baren-shin” (core ropes), and “tsutsumigawa” (bamboo skin for wrapping). There are various thicknesses of baren-shin, and they are used according to their purposes.
Read More
Bizen ware
- Ceramics
- Generic term
Stoneware made mainly in Imbe area in Bizen City, Okayama Prefecture. One of the six ancient kilns in Japan. Characterized by high temperature firing without using glazes and various expressions brought about by transformation.
Read More
Bokashi (Gradation)
- Other
- Technique
A technique for woodblock printing where a color gradually fades from deep to pale and finally colorless. Creates a gradation by mixing paints and glue on a moistened wood block, and then rubbing the paper that is pressed against it. Perspectives and three-dimensional effects can be expressed.
Read More
Buff polishing
- Metalwork
- Technique
A technique to polish metal surfaces with a rotating disc of abrasive materials attached to lightweight cloth. By using a variety of abrasives, it is possible to transform a rough surface to a mirror-like finish.
Read More

C

Celadon
- Ceramics
- Classification
A type of ceramics in ash glaze which includes a small content of iron, called celadon glaze. With high temperature of over 1,200 degree through reduction firing, the color varies from blue to green. Its delicate tones depend on the blending ratio of iron and methods for firing. Originated in ancient China, celadon ware was highly regarded as prestigious ceramics which expresses the color of Jade. Later, it was spread to Korea, Southeast Asia and Japan. Celadon wares in powder blue (粉青 – funsei ) produced in China during the Southern Song Dynasty were especially cherished as the highest-ranked masterpieces in Japan. Its literal name is sometimes distinguished in Chinese character by its materials, when using stones it is referred to as 青磁 – seiji, and when using clay it is referred to as 青瓷 – seiji.
Read More
Chara
- Ceramics
- Others
A type of glaze with properties between those of white slip (a liquid clay mixture used to decorate pottery) and normal glazes, used mainly in Tokoname, Aichi Prefecture.
Read More
Chokin (Engraving)
- Metalwork
- Technique
A decorative technique in metalworking in which patterns are engraved on the surface of metal using a tool called a tagane, or chisel. Engraving techniques also include sukashi-bori (“open” or “pierced” work, in which certain areas are cut away to reveal a pattern), zogan (“inlaying,” in which other metals are inserted), and uchidashi (“hammering,” in which unevenness is formed by tapping).
Read More
Crystal glass
- Glass
- Material
Glass to which lead oxide is added to remove impurities such as iron oxide. Crystal glass is characterized by high transparency, high reflectivity and refractive index, and a beautiful shine. It is often used for high-grade glassware and artistic crafts, and its brilliance enhanced by faceting and other decorations. Crystal glass is heavier than ordinary glass and produces a clear metallic sound when struck.
Read More

D

Daido-tsuchi
- Ceramics
- Material
A type of clay that is the main raw material for Hagi ware. It is collected in an area around Daido, Hofu City to Yotsutsuji Suzenji, Yamaguchi City, in Yamaguchi Prefecture. It is generally characterized by having a large proportion of sand and gravel and low shrinkage of the clay when fired.
Read More
Dami
- Ceramics
- Technique
A technique of painting within outlines.
Read More

E

E-Karatsu (Painted Karatsu)
- Ceramics
- Technique
One of the decorative techniques of Karatsu ware. Patterns including plants, animals, and geometric designs, are drawn with iron-based paint.
Read More
Earthenware
- Ceramics
- Generic term
Vessels and objects formed from clay and fired at low temperatures of about 700-800 degree Celsius without glaze. Therefore, it is brittle and has a high water absorption rate. However, earthenware is suitable for cooking and they are highly fire-resistant.
Read More
Echizen lacquerware
- Lacquerware
- Generic term
Echizen lacquerware is a general term for lacquerware produced in the Kawada area of Sabae City, Fukui Prefecture. Its history dates back to the end of the Kofun period (“Ancient Tombs” or tumulus period), about 1,500 years ago. In the Edo period (1603-1868), a group of lacquer harvesters called Echizen-shu who extracted lacquer from trees were active throughout the country. Later on the techniques of maki-e (decorative finishes achieved by drawing designs with lacquer and gold or silver powder) and chinkin (gold-inlaid lacquerware, using powdered gold in etched grooves) were developed, and since the Meiji era (1868-1912), the region has become a major lacquerware production center in Japan. Traditionally, lacquerware is made in a series of distinct steps, each performed by a specialized lacquerware craftsman.
Read More
Echizen ware
- Ceramics
- Generic term
Generic name of ceramics made in Echizen town, Fukui Prefecture. One of the Japan’s six ancient kilns. Characterized by high temperature firing using natural glaze.
Read More
Edo kiriko
- Glass
- Generic term
Generic name for traditional handmade cut glass originating from Tokyo. Said to have started back in 1834, latter half of Edo period. Cut patterns are very detailed, and the light reflection is clear because of the thinness of the glass.
Read More
Edo woodblock printing
- Other
- Generic term
Woodblock prints in multiple colors which is native to Japan. It is created through the collaboration between four specialist artisans- “eshi” or a designer who draws images, “horishi” or an engraver who carves it on a woodblock, “surishi” or a printer who transfer the paints onto the paper, and “hanmoto” or a publisher who oversees all planning and sales. During the Edo period, ukiyo-e printing was devised as a media source that people could easily enjoy.
Read More

F

First Raku, second Hagi, third Karatsu
- Ceramics
- Generic term
An expression that refers to three kinds of pottery treasured by Japanese tea ceremony experts. They are Raku ware from Kyoto, Hagi ware from Yamaguchi and Karatsu ware from Kitakyushu.
Read More
Free-blowing
- Glass
- Technique
A technique whereby glass is formed freely in the air using tongs or trowels without the use of mold. After winding a small portion of molten glass on the tip of a blowpipe, the molten glass is soften with heat in a kiln and inflated into a spherical shape in the air.
Read More
Fuki-urushi (Wiping lacquer)
- Lacquerware
- Technique
A technique whereby raw lacquer is applied and then wiped off repeatedly with a cotton cloth. Also called suri-urushi. It makes it possible to show the texture and beautiful grain of the wood while giving strength to the vessel.
Read More
Fushikezuri
- Wood & Bamboo
- Technique
A process of making bamboo strips. Shaving the ends of the bamboo node with a knife.
Read More

G

Glassblowing
- Glass
- Technique
A glass forming method. It is said that it began in ancient Rome around the 1st century B.C. Molten glass is wound on a blowpipe and then air is blown into it to form shapes. It is mainly classified into two types; free-blowing and mold-blowing.
Read More
Glaze
- Ceramics
- Others
Glaze is a vitreous material for coating the surface of ceramics. Not only for decoration, glaze can strengthen the vessel, make it glossy and prevent water absorption.
Read More
Goma
- Ceramics
- Technique
A glazed surface of a vessel to which wood ashes have been applied during firing. The name comes from how its appearance resembles sprinkled sesame seeds.
Read More
Gosai-te
- Ceramics
- Technique
A decorative technique in which five colors of paint (green, yellow, purple, navy blue, and red) are applied in thick layers to create a painted surface. It was introduced to Japan from China in the middle of the 17th century.
Read More
Gosu
- Ceramics
- Material
A cobalt blue glaze containing cobalt oxide pigments. Gosu itself is a blackish mineral, but after reduction firing, the color changes to blue. Currently, it is difficult to obtain natural Gosu. Therefore, a compound that mixes cobalt and iron are being used prevalently.
Read More

H

Hagi ware
- Ceramics
- Generic term
Ceramics made mainly in Hagi City and Nagato City in Yamaguchi Prefecture. It is roughly classified as Matsumoto-hagi and Fukawa-hagi and are mainly made into tea bowls.
Read More
Hakeme
- Ceramics
- Technique
The technique of applying slip (a liquid clay mixture used to decorate pottery) with a brush to the base material and firing it with a transparent glaze. (Hake-me literally means “brush marks” in Japanese.) Various brush strokes can be created by the combination of slip, brush material, and how it is used.
Read More
Hidasuki (Fire markings)
- Ceramics
- Technique
A pattern of Bizen ware which features reddish lines across the pale brown base which resembles cord bands. In order to make this pattern, the pottery base is covered with straw before firing. And the covered parts react with the component in the clay and produce its reddish color.
Read More
Hikimono (Woodturning)
- Lacquerware
- Wood & Bamboo
- Classification
- Technique
A technique to carve round shaped tableware by putting a dried lumber on a spinning lathe and applying a turning tool like a chisel to it. Products made by using this technique include bowls and round trays.
Read More
Hon-kataji
- Lacquerware
- Technique
A base coating which is currently the most commonly used. Layers of coarse to fine base lacquer are gradually applied after which they are polished using grindstone and water to achieve a smooth surface.
Read More
Horimono (Engraving / Embossing)
- Lacquerware
- Wood & Bamboo
- Classification
- Technique
A technique of woodworking to decorate the surface of wood by carving reliefs on the internal and external surfaces.
Read More
Hosowari
- Wood & Bamboo
- Technique
Splitting the bamboo culm into strips and arranging them prior to weaving. A step used in making woven product in bamboo crafts.
Read More
Hotarude
- Ceramics
- Technique
An openwork technique to make cuts or holes that go right through biscuit and then apply transparent glaze to fill up the holes before firing again. It is called “hotarude” because the patterns shine through the light, compared to the light of hotaru (a firefly).
Read More

I

Ikomi (Casting)
- Ceramics
- Technique
A method of forming pottery using plaster molds instead of the potter’s wheel. The fluid slip solidifies as the plaster mold absorbs the moisture from the clay. This method is suitable for mass-production. It can be divided into two general methods: pressure casting and slip casting.
Read More
Inbe-te
- Ceramics
- Technique
One of the decorative techniques of Bizen ware. The base clay is formed and dried, then covered with watered-down clay with a high iron content and fired to produce a glaze-like sheen on the surface. As a result, it is also effective in preventing water leakage.
Read More
Iro Nabeshima (Colored Nabeshima)
- Ceramics
- Classification
A type of Nabeshima ware characterized by elegant and subdued colors, with delicate patterns painted in indigo blue that are overglazed with red, yellow, and green designs.
Read More
Ishi-haze (Stone bursts)
- Ceramics
- Others
- Technique
When a pebble in the clay bursts out onto the surface during firing. It is appreciated as one of the unique views of ceramics.
Read More
Isubai glaze
- Ceramics
- Technique
A type of glaze made from the material which is obtained from the ash of burnt “isu” tree (Distylium racemosum). It has a higher content of lime and less iron. Used for Imari ware produced in the Edo period which is called “ko-imari”, it is characterized by its soft hues and smooth texture.
Read More

J

Jinoko
- Lacquerware
A powder of calcined diatomaceous earth. Mixed with raw lacquer and glue, it is used as a lacquer base.
Read More
Joseon ware
- Ceramics
- Generic term
Ceramics and porcelain produced on the Korean peninsula during the Joseon dynasty (14th century onward). Following the development of Funseisaki ware, known through such representative styles as Mishima (using inlaid decoration or inka stampings), Kohiki (using white slip and a clear glaze for decoration), and Hakeme (with a white slip brushed on), white porcelain and decorative techniques such as Sometsuke (blue and white porcelain), Tessha (iron-brown decoration), and Shinsha (red-copper decoration) also flourished. Joseon ceramics were introduced to Japan by Soetsu Yanagi through his mingei (folk art) movement, and attracted many enthusiasts.
Read More

K

Kakigara (Oyster shell)
- Ceramics
- Technique
A technique unique to the Tokoname region, in which ground oyster shell is sprinkled on the base material and fired to produce a fine speckled pattern.
Read More
Kan-nyu (Crackle)
- Ceramics
- Technique
The cracking that appears on the surface of glazed ceramics as a result of the differing rates of expansion and contraction between base and glaze during firing. Crackle is regarded as an important factor in appreciating the aesthetic quality of such ceramic works.
Read More
Kanna (Plane)
- Wood & Bamboo
- Others
One of the tools for woodworking, mainly used for shaving the surface of wood. It has many variations and shapes depending on the purpose of use.
Read More
Kanshitsu
- Lacquerware
- Technique
A technique in which linen cloth soaked with lacquer is pasted onto a mold made of wood, clay, or plaster. There are two types of kanshitsu technique: dakkatsu kanshitsu, in which the original clay or plaster mold is removed after drying to leave the inside hollow, and mokushin kanshitsu, in which the original wooden mold is not removed, but is left inside as the core. Kanshitsu was introduced to Japan from Tang Dynasty China during the Nara period (710-784), where it is known as 夾紵 (pronounced “kyocho” in Japanese or “jiazhu” in Chinese). Since it can be freely shaped, it is now mainly used to create works of art in richly varied forms.
Read More
Karatsu Nanban
- Ceramics
- Technique
One of the techniques of Karatsu ware, which reflects a style of unglazed pottery fired at a high temperature known as yakishime. Although Karatsu ware did not originally have a yakishime tradition, in recent years the potter Takashi Nakazato began to make it that way using Karatsu clay, based on his experience with Tanegashima ware. The name “Karatsu Nanban” was chosen because of the many pieces of pottery that had been brought to Japan from “Nanban,” or Southeast Asia, that were fired in yakishime style.
Read More
Karatsu ware
- Ceramics
- Generic term
A general term for ceramics fired in western Saga and northern Nagasaki Prefectures. This region prospered as a major pottery production area and is especially renowned for its ceramics made for the tea ceremony, which were first produced in earnest during the Momoyama period (1573 – 1603). Following a period of decline, it recovered during the Showa era (1926 – 1989). Karatsu ware is notable for the variety of decorative techniques such as E-Karatsu (Painted Karatsu), Madara-Karatsu (Mottled Karatsu), Chosen Karatsu (Korean Karatsu), Mishima Karatsu and Kawa-kujira (whale skin), and as such has a wide variety of expressions.
Read More
Karazuri (Emboss)
- Other
- Technique
A technique for woodblock printing to make an embossed pattern on paper by rubbing it with strong pressure on an engraved wood block without applying paints.
Read More
Kawa-kujira
- Ceramics
- Technique
One of the decorative techniques of Karatsu ware. The blackened rim of the vessel’s mouth is painted with iron-based pigment. The name comes from comparing the black of the rim to the skin of a whale (“kujira” is the Japanese word for “whale”, and “kawa” for “skin”), and the color of the vessel itself to the whale’s body.
Read More
Kawari-nuri
- Lacquerware
- Technique
A general term for techniques that take full advantage of the special characteristics of lacquer. It encompasses various techniques, such as repeatedly applying and polishing multiple coats of colored lacquer or utilizing the adhesive strength of lacquer. It is also called “Saya-nuri,” from the Edo period practice by which craftsmen created various types of elaborate sword sheaths using such kawari-nuri techniques.
Read More
Kento
- Other
- Others
Marks that are carved on a wood block to serve as an alignment guide for the paper to be placed in the correct position so that the colors to be added accurately.
Read More
Kenyo (Jian yao kiln)
- Ceramics
- Others
A kiln located in Shuiji Town, Jiangyang County, Fujian Province, China. It was founded in the late Tang Dynasty and is widely known for specializing in firing black-glazed Tenmoku ware, called Kensan (in Chinese, Jian zhan, which translates as “Jian tea cup”) in the Song Dynasty.
Read More
Ki-Seto
- Ceramics
- Generic term
- Technique
A type of Mino ware created during the Azuchi-Momoyama period (1573 – 1603). It is characterized by a pale yellow glaze, and is often decorated with line carvings and floral motifs, as well as mottled patterns in green caused by copper sulfate called tanpan, and in brown caused by iron. It uses two types of glazes: one transparent and shiny called “Kiku-zara-de” (chrysanthemum plate) or “Guinomi-de” (sake cup), and the other moist like fried bean curd called “Ayame-de” (iris) or “Aburage-de” (deep fried tofu).
Read More
Kijibiki (Woodturning)
- Lacquerware
- Wood & Bamboo
- Technique
A technique to carve round shaped vessels by spinning wood blocks on a lathe using turning tools that are similar to chisels. An artisan specializing in this process is called “kijishi” or a woodturner using special customized turning tools resulting in wooden vessels of the highest quality.
Read More
Kijishi (Woodturner)
- Lacquerware
- Wood & Bamboo
- Generic term
A craftsman who uses a rokuro, or spinning lathe, to shape wood to make wooden products such as bowls and trays. Also called a rokuroshi (woodturner).
Read More
Kinran-de
- Ceramics
- Generic term
- Technique
A decorative technique where gold is applied over red or colored painting, as well as the generic name for ceramics decorated with that technique. It began in China during the Song dynasty (960-1279) and developed during the Ming (1368-1644) and Qing (1616-1912) dynasties. It was first produced in Japan in the mid-Edo period (1603-1868).
Read More
Kinsai
- Ceramics
- Generic term
- Technique
A generic term for the technique of using gold as a decoration as well as for ceramics decorated in that fashion.
Read More
Kiriko (Cut glass)
- Glass
- Technique
A technique of sculpturing the surface of glass and applying various patterns with a grinder. It is achieved through various steps such as roughing, stoning and polishing. Traditionally, the patterns are in geometric forms. Edo kiriko and Satsuma kiriko are the best representation.
Read More
Kise-glass (Cased glass)
- Glass
- Technique
A technique in which two or more layers of different colors are partially or completely layered and welded to the shaped glass while it is still hot. When the glass is covered on the outside, it is called “soto-gise”, or “outer layer-cased”, and when it is layered on the inside, it is called “uchi-gise”, or “inner layer-cased.” It can also be used as a base for carving and surface processing, to create decorative effects that reveal multiple different colors.
Read More
Kiso lacquerware
- Lacquerware
- Generic term
Generic name of lacquerware produced in Shiojiri City, Nagano Prefecture and the surroundings areas.
Read More
Ko-Imari
- Ceramics
- Generic term
A generic term for porcelain produced during the Edo period (1603-1868), mainly in Arita, Hizen Province, or what is now Saga and Nagasaki Prefectures. The name “Imari-yaki” was derived from the fact that porcelain produced around Arita at that time was shipped from Imari Port. Many of the works have high historical and antique value.
Read More
Ko-sometsuke
- Ceramics
- Technique
Porcelain made in private kilns in Jingdezhen during the Tenkei period, in the late Ming Dynasty (first half of the 17th century). The shapes and patterns has a free and easy style compared to traditional Chinese porcelain.
Read More
Kodai
- Ceramics
- Others
The “foot” of the back of a ceramic vessel. The kodai is considered to be one of the most important features of a vessel. It can be roughly divided into two types: Kezuri Kodai, a “scraped” foot which is carved out after molding, and Tsuke Kodai, an “attached” foot which is molded from clay and attached to the body of the vessel. Depending on the shape of the foot, kodai can be categorized as wa (“ring”), janome (“snake’s eye”), mikazuki (“crescent moon”), wari (“split”), kiri (“cut”), takenofushi (“bamboo joint”), and others.
Read More
Kohiki
- Ceramics
- Technique
A firing technique wherein the entire surface of a base is covered with white slip (a liquid clay mixture used to decorate pottery) and then with a transparent glaze before firing, producing a characteristic soft texture. Also known as kofuki.
Read More
Kokura ori
- Textiles
- Generic term
Cotton textile made in Kokura, Kitakyushu City, Fukuoka Prefecture. Good quality and durable fabric featuring vertical stripes.
Read More
Kumiko
- Wood & Bamboo
- Generic term
- Technique
The art of wood joinery without using any nails or glue, or the techniques of doing so. The wood is meticulously prepared with holes and grooves and then the pieces assembled one by one. This technique, which began in the Asuka period (592 – 710), was mainly used for framing and decoration of shoji screen and ranma transoms. The delicate patterns and unique shadows that emerge when held up to the light are truly enchanting.
Read More
Kurimono (Hollowing)
- Lacquerware
- Wood & Bamboo
- Classification
- Technique
A technique of woodworking to hollow out a block of wood with a chisel and knife. Products made by using this technique include spoons and trays.
Read More
Kuro Karatsu (Black Karatsu)
- Ceramics
- Technique
One of the decorative techniques of Karatsu ware, it is fired with an iron based glaze. Depending on the amount of iron and the degree of oxidation, the color can range from candy amber to dark brown to jet black.
Read More
Kusaki-zome
- Textiles
- Technique
Kusaki-zome, which literally means “dyed with plants and trees,” refers to natural dyeing techniques using plant, animal, and mineral elements rather than synthetic substances. Common dyes include those made from indigo, madder, safflower, gardenia, turmeric, sappanwood, kariyasu (miscanthus tinctorius), and Amur cork tree.
Read More
Kushime Kodai
- Ceramics
- Technique
Decoration of the kodai, the foot of the ceramic, with a kushi-me (comb pattern) in blue and white, a motif traditionally seen in Nabeshima works.
Read More
Kutani ware
- Ceramics
- Generic term
A general term for colored ceramic ware fired mainly in the southern part of Ishikawa Prefecture, most distinguished by its splendid colors. It includes several styles, including Ao-te, an application of deep green overglaze; Gosai-te (or Iro-e), which uses five vivid colors – green, yellow, blue, purple, and red – to their full extent; and Aka-e, which uses red and features intricate designs.
Read More
Kyo ware
- Ceramics
- Generic term
Generic name of ceramics made in Kyoto. There are various kinds of techniques.
Read More

L

Lost wax casting
- Metalwork
- Technique
A casting technique that evolved from wax casting. The use of silicon rubber enables the casting of complex shapes. It is also characterized by its ability to produce a precise casting surface. This is one of the most advanced metal casting techniques available.
Read More

M

Madara Karatsu (Mottled Karatsu)
- Ceramics
- Technique
One of the decorative techniques of Karatsu ware. It is made by coating a cloudy white glaze of straw ashes over rough clay and firing it. As “madara” means spots in Japanese, the name comes from the appearance of blue or black spots on the surface of the glaze as the iron content of the base material dissolves. This technique is often used for tea bowls and guinomi sake cups.
Read More
Magemono (Bentwood)
- Lacquerware
- Wood & Bamboo
- Classification
- Technique
A technique of woodworking to bend thin wooden planks into circle or oval shapes, products made with this technique include wappa (food box) and dipper.
Read More
Makiji
- Lacquerware
- Generic term
- Technique
Makiji is a base coat of raw lacquer applied directly to the wood or to the base after the cloth has been applied. Before the lacquer dries, it is sprinkled with powdered diatomaceous earth called jinoko or a polishing powder called tonoko. Because no water is used the surface is very durable, with a coarse, scratch-resistant texture.
Read More
Mentori
- Ceramics
- Technique
A technique of chamfering a surface to create a faceted polyhedral shape. This technique is used to create a linear plane on a rounded vessel, giving it a different impression. It is sometimes applied to detail areas such as the kodai (foot) and spout.
Read More
Metal casting
- Metalwork
- Generic term
- Technique
A technique to make metalworks by pouring molten metal into a mold, or “igata” in Japanese and extracting it after it is cooled. The technique makes it possible to form metal freely, which otherwise is a difficult material to process. A product made by this casting method is called “imono”. This method also allows for mass production. Once the mold of a prototype is made it is then possible to make multiples of the product.
Read More
Mikomi
- Ceramics
- Others
The view presented by the entire inside, or the bottom part of the inside, of a ceramic vessel. Along with the kodai or “foot”, it is one of the most important features of a vessel.
Read More
Mino ware
- Ceramics
- Generic term
A general term for ceramics fired in the Tono region of Gifu Prefecture. A wide variety of types exist, with four major representative styles – Ki-Seto, Seto-guro, Shino, and Oribe – together called Mino-Momoyama ware. As time went on, the production of finer porcelain also flourished. Even today, Gifu Prefecture is still the largest producer of ceramics in Japan, producing about half of the country’s ceramics.
Read More
Mishima
- Ceramics
- Technique
One of the decorative techniques known as zogan or inlaying. The technique involves decorating the base material before it dries with patterns such as patterned stamps (inka), or carved lines; applying slip (a liquid clay mixture used to decorate pottery) to the depressed areas; and finally coating transparent glaze over and firing the piece.
Read More
Mogake
- Ceramics
- Technique
A technique unique to Tokoname City, Aichi Prefecture, in which seaweed is wrapped around a base clay and fired with it in the kiln to create a pattern. The part touched by the seaweed develops a scarlet color.
Read More
Mushikui (bug-eaten)
- Ceramics
- Technique
Markings resembling glaze which has fallen off the rim of pottery. The word comes from its resemblance to a bug-eaten hole. It is also used as a technique to express a sense of antiquity in pottery making.
Read More
Mutsume-ami (Hexagonal weave)
- Wood & Bamboo
- Technique
One of the basic weaving methods for bamboo crafts where the woven pattern is hexagonal.
Read More

N

Nabeshima celadon
- Ceramics
- Classification
A type of Nabeshima ware in which a celadon glaze is applied to the raw stone from Okawachiyama and repeatedly fired in a way that prevents the work from coming into contact with oxygen. This reduction firing technique causes it to develop a beautiful blue-green color.
Read More
Nabeshima sometsuke (Ai Nabeshima)
- Ceramics
- Classification
A type of Nabeshima ware in which porcelain is dyed in a single color using a deep indigo blue “Gosu” pigment, giving it a distinctive noble beauty.
Read More
Nabeshima ware
- Ceramics
- Generic term
A generic term for the high-quality porcelain produced in kilns operated by the Nabeshima clan between the 17th and 19th centuries. At that time it was manufactured as gifts for the shogun and feudal lords because of its outstanding quality and artistry. Its distinctive original style, which has been carried on to this day, is known simply as Nabeshima style, and includes “Iro Nabeshima” (colored Nabeshima), “Nabeshima sometsuke” (blue-and-white Nabeshima), “Ai Nabeshima” (Indigo Nabeshima), and “Nabeshima celadon.”
Read More
Narashi (Planishing)
- Metalwork
- Technique
One of the processes of tankin (forging), in which a hammer or wooden mallet is used to adjust a piece’s overall shape and make its thickness uniform. There are two types of planishing: ara-narashi, a rough planishing to even out the larger rough hammer marks left from the forming process, and shiage-narashi, a finishing planishing to set its final appearance.
Read More
Negobouki
- Metalwork
- Others
Bundled rice straw used for brushing the metal during the ohaguro stage.
Read More
Nezumi-Shino
- Ceramics
- Generic term
- Technique
A type of Shino, a representative style of Mino ware. After the molded vessel is coated with an iron-rich clay slip called oni-ita, the patterned areas are scraped off and fired with a choseki-yu, or feldspar glaze. The name “Nezumi”-Shino comes from the fact that the part of the vessel where the oni-ita remains is gray colored like a mouse, or nezumi in Japanese.
Read More
Ni-iro
- Metalwork
- Technique
Refers to the color or coloring method in which metals such as copper alloys are simmered in a pan containing a mixture of copper sulfate and copper carbonate, resulting in a patina on the metal surface. The color tones that are produced, such as brass, dark brown, and blackish bronze colors, vary depending on the composition of the alloy. The traditional practice of washing the metal ware with grated Japanese radish juice before boiling has been used for a long time to obtain good coloration.
Read More
Nobori-gama (Climbing kiln)
- Ceramics
- Generic term
A kiln that is built on a hill or other slope and has a structure designed to make use of the slope to increase the temperatures in the kiln. In a narrower sense, it refers to a kiln with several firing chambers in succession on a slope; this is known as a “renbo-shiki nobori-gama,” or multi-chambered climbing kiln.
Read More
Nogime Tenmoku
- Ceramics
- Classification
A type of Tenmoku fired at the Jian kilns in Fujian Province during the Southern Song dynasty (1127-1279) in China. Crystals of iron oxide contained in the glaze melted in the kiln and flowed down, forming fine linear patterns. In Japan it is called “Nogi-me” (ears of rice), while in China it is known as “Tu-hao” (rabbit’s hair brush).
Read More
Nukayaki
- Metalwork
- Technique
A technique of firing metal such as a copper alloy after coating it with a mixture of rice bran (nukamiso) with salt and sulfur. The burnt marks from rice bran coating result in mottle-like patterns on the metal.
Read More
Nushi (Nurishi)
- Lacquerware
- Generic term
Traditionally, lacquerware is made in a series of distinct steps and nushi is a specialized craftsman in the process of applying lacquer.
Read More

O

Ohaguro
- Metalwork
- Technique
Refers to the color or coloring method in which metal is dyed using a solution which has been allowed to stand, consisting of iron scraps, Japanese sake and vinegar before it is fired. The shiny finish is achieved by brushing the metal many times with the liquid solution while it is being heated. Frequency of brushing and the concentration level of the solution result in a wide range of colors from red to dark brown and black.
Read More
Oribe
- Ceramics
- Generic term
- Technique
A type of Mino ware first created during the Azuchi-Momoyama period (1573–1603). It is thought to have reflected the taste of Oribe Furuta, a celebrated master of the Japanese tea ceremony, and is characterized by novel shapes and patterns. It can be classified into various types depending on the glaze and technique, including the copper-green glazed So-Oribe and Ao-Oribe, as well as Aka-Oribe, Kuro-Oribe, Yahichida-Oribe, and Narumi-Oribe.
Read More

P

Plain weave
- Textiles
- Classification
- Technique
The simplest of the three fundamental types of weave: plain, satin, and twill. Plain weave is created by weaving the warp (vertical threads) and weft (horizontal threads) in an up-and-down pattern, alternating each row.
Read More
Porcelain
- Ceramics
- Generic term
Vessels and objects made using mainly kaolin from shattered porcelain stones. It is stronger than pottery because it is fired at a higher temperature of about 1300 degrees Celsius and has a clear sound when struck. It has no water absorption. The translucent quality of porcelain gives you a sense of coolness and hardness. Traditional production areas are Arita, Tobe, Kyoto, and Kutani.
Read More
Pottery
- Ceramics
- Generic term
Vessels and objects made from potter’s clay. It is fired at around 800-900 degrees Celsius after being glazed. It has a high water absorption and high heat retention. Compared to porcelain, pottery gives a sense of softness and warmness. The trditional production areas are Karatsu, Hagi, Mino, and Mashiko.
Read More
Pressure casting
- Ceramics
- Technique
A molding method in which pressure is applied using an air pump or other means to pour slip into special plaster molds formed from specially formed pairs of convex and concave shapes. When the plaster has hardened after absorbing the water, the molded products are removed from the molds. This method is mainly used for mass production of irregularly-shaped vessels.
Read More
Printing block
- Other
- Others
A wooden board that is used as a printing material when creating a woodblock print. In traditional ukiyo-e printing, cherry wood is the main source of wood.
Read More

R

Rankakude (Egg shell)
- Ceramics
- Others
The finest porcelain with the thinness reminiscent of an egg shell, which was made in the late Edo period (19th century) under the order by the Hirado clan. It was exported to Europe where it was highly valued. The production was revived recently having ceased after World War I.
Read More
Rokuro (Potter's wheel)
- Ceramics
- Technique
One of the tools for forming pottery by using centrifugal force from the rotating wheel to shape the clay. There are various types of potter’s wheels such as hand-operated wheel, kick wheel, and motor-driven wheel. The motor-driven wheel is the most popular as the rotation speed is easily adjustable by stepping on the pedal.
Read More

S

Sangiri
- Ceramics
- Technique
An interesting and unexpected change in color or pattern caused by the absence of oxygen in during reduction firing due to the burial of the vessel in the ashes during firing. Sangiri can vary in color from black to gray to blue to reddish brown or other colors.
Read More
Sashimono (Joinery)
- Lacquerware
- Wood & Bamboo
- Classification
- Technique
A technique of woodworking to make boxes or furniture by assembling wood boards without using nail. Products made by using this technique include racks and chests.
Read More
Sashimutsume-ami
- Wood & Bamboo
- Technique
A technique in which thinly made bamboo strips are embroidered by using mutsume-ami (hexagonal weave) and its derivative asanoha-ami (hemp leaf weave) as a foundation.
Read More
Satsuma Kiriko
- Glass
- Generic term
A generic term for faceted glasswork produced in the Satsuma domain (today’s Kagoshima Prefecture) during the late Edo period (1853 – 1868). It is characterized by a series of color gradations called “bokashi” arising from the cutting of the glass. The gradations are created by hand-cutting patterns into “iro–kise glass,” which itself is formed as a thick layer of colored glass overlaid on transparent glass. Although production of this type of glass had once been discontinued, it is now being brought back.
Read More
Seto-guro
- Ceramics
- Generic term
- Technique
A type of Mino ware first created in the Azuchi-Momoyama period (1573–1603). Jet-black pottery produced using the “Hikidashi” (meaning to withdraw or pull out) technique, in which iron-based glaze is applied and then removed from the kiln during firing and allowed to cool rapidly. Also known as “Hikidashi-guro”.
Read More
Seto ware
- Ceramics
- Generic term
Generic name of ceramics produced mainly in Seto City, Aichi Prefecture. In the past, it was very popular especially in the eastern parts of Japan so much so that all porcelain was generally referred to as “Setomono”. One of the six ancient kilns of Japan.
Read More
Shibori
- Metalwork
- Technique
A metal forging technique in which a metal plate is placed on a curved iron tool called an ategane, and then shaped with a hammer or wooden mallet into a sculptural form.
Read More
Shigaraki ware
- Ceramics
- Generic term
A style of ceramics produced in Shigaraki, Shiga Prefecture. Fired at high temperatures without glaze, it is characterized by a tactile landscape resulting from its coarse base material and natural ash glaze. One of the six ancient kilns in Japan.
Read More
Shima (Stripe)
- Textiles
- Generic term
A pattern consisting of straight lines produced by the color scheme of warp and weft thread. Up until the Momoyama period (1573 – 1603), this pattern was not called 縞 – shima then but 筋 – suji, which has a meaning closer to “line.” From the early modern era, many stripe-patterned textiles were brought to Japan by European ships mainly from Spain or Portugal. Since these striped textiles were brought from another continent across the ocean, people started to call them shima-mono, literally “island things.” From this, they later adopted a different character for shima (縞, meaning “stripe”) which is a homonym of the character for “island” (島, also read as shima).
Read More
Shino
- Ceramics
- Generic term
- Technique
A type of Mino ware which first appeared in the Azuchi-Momoyama period (1568–1600), as well as a general term for ceramics in which a white Shino glaze (based on feldspar) is applied to the “Mogusa-tsuchi” clay. There are several types of Shino ware, including Muji-Shino (plain), E-Shino (picture), Nezumi-Shino (gray) and Beni-Shino (crimson).
Read More
Shinogi
- Ceramics
- Technique
A decorative technique whereby ridgelines are carved on the surface. It derived its name from the appearance of the ridges on Japanese swords which are called “Shinogi”.
Read More
Shira-take (White bamboo)
- Wood & Bamboo
- Material
A bamboo with a beautiful shiny surface, made by sun-drying and polishing after removing its oil contents. This bamboo material is widely used for fences, architecture, tea utensils as well as craft works.
Read More
Shizen-nerikomi
- Ceramics
- Technique
A technique used in creating Bizen ware. In the normal nerikomi (literally, “kneading”) technique, different clays are kneaded together by hand to form a pattern. However shizen nerikomi, or “natural kneading,” uses raw clay from a single source, and leaves it as natural as possible: the artist removes pebbles from the clay, which is otherwise left in a state similar to that of the original soil it came from, and shapes it by hand. This allows the variations in the composition of the original clay to be utilized, and the surface of the work can be made to look like a natural geological formation.
Read More
Shizen-yu (Natural ash glaze)
- Ceramics
- Others
A glazing produced in a wood-fired kiln, when the ashes from the burned fuel fall onto the substrate and melt to form a glaze.
Read More
Shoki-Imari (Early Imari)
- Ceramics
- Generic term
A general term for porcelain produced in the Arita area of Saga Prefecture from the early 17th century, when Japan’s first porcelain was fired, to the 1640s, when colored paintings were introduced. Many of the pieces are sometsuke, or blue and white porcelain.
Read More
Six ancient kilns
- Ceramics
- Generic term
Generic name of the six distinctive ancient kilns among all Japanese kilns, which have produced pottery from medieval times to the present day. These are Seto ware, Tokoname ware, Shigaraki ware, Echizen ware, Tanba-Tachikui ware and Bizen ware.
Read More
Slip casting
- Ceramics
- Technique
A molding method in which slip poured into a plaster mold is allowed to stand for a certain period of time, with any excess slip being poured out when it reaches the required consistency. The plaster molds utilize plaster’s moisture-absorbing and adherence properties. It is mainly used for the mass production of hollow bag-shaped vessels such as teapots and vases. Also called “gaba” casting.
Read More
Soda glass
- Glass
- Material
The most common type of glass. It is easy to melt and mold but is vulnerable to rapid heating and rapid cooling. It sounds slightly dull when struck. It is commonly used as tableware, bottles and flat glass.
Read More
Sometsuke (Blue and white porcelain)
- Ceramics
- Technique
Decorating on biscuit under transparent glaze with a blue pigment. This pigment is known as zaffer or “gosu” in Japanese. It was first used in China in the 14th century and then spread around the world. In Japan, it was first introduced in Arita at the beginning of 17th century. The decoration methods can be broadly divided into two ways with each method using different brushes. One is drawing just the outline and the other is painting inside the outline which is called “dami” in Japanese. There are also other techniques such as “fukizumi” which creates pattern by spraying gosu on the surface resulting in a charming contrast of blue and white.
Read More
Stoneware
- Ceramics
- Generic term
Vessels and objects having characteristics that falls between pottery and porcelain. It is made from clay and fired at high temperatures of about 1200-1300 degree Celsius. It has a low water absorption rate and is opaque. In Japan, stoneware refers mainly to Bizen, Shigaraki, Tokoname and other unglazed ceramics.
Read More
Sukashi-bori
- Ceramics
- Technique
The technique of carving out patterns on partially dry porcelain with a small knife, creating a pattern that emerges when light shines through the translucent surface.
Read More
Suri-otoshi
- Ceramics
- Technique
A technique wherein white slip (a liquid clay mixture used to decorate pottery) is partially wiped off (in Japanese “suri-otoshi”) to reveal the color and pattern of the base material. Taki Nakazato created this technique, inspired by Negoro-nuri style lacquerware.
Read More

T

Taga (Hoop)
- Wood & Bamboo
- Others
A ring made of metal or bamboo. It is put around a wooden tub or barrel to fasten it.
Read More
Tagamono (Cooperage)
- Wood & Bamboo
- Classification
- Technique
A technique of woodworking to make containers and products by fastening wooden slats which are placed upright in a circle using a hoop called “taga”. It includes tubs and barrels.
Read More
Takaoka copperware
- Metalwork
- Generic term
Generic name of copperware made in Takaoka City, Toyama Prefecture. Takaoka is renown as the largest production area of copperware in Japan, accounting for over 90% of domestic production.
Read More
Tankin (Forging)
- Metalwork
- Technique
A metalworking technique in which a hammer or wooden mallet is used to shape a sheet or ingot of metal, such as gold, silver, iron, or copper, by hammering or bending.
Read More
Tataki (Tapping)
- Ceramics
- Technique
The technique of forming clay into a long ‘string’, laying it in spirals to form a vessel, and then smoothing out the joints and shaping it by tapping (in Japanese, “tataki”) the surface with a wooden mallet against wooden battens placed inside. The battened boards and mallet are carved to safely separate the clay from the board, but also produce a decorative effect as if the surface of the vessel is engraved with a pattern.
Read More
Tatara-zukuri (Slab-building)
- Ceramics
- Technique
A method of molding slabs of clay by bending or combining them on a board or flat surface. Unlike thrown molding which uses the rotation of a potter’s wheel to make circular vessels, tatara-zukuri is used to make square bowls and other vessels from flat slabs of clay.
Read More
Tategi-dori
- Lacquerware
- Wood & Bamboo
- Technique
A method to saw lumber by following the direction of the grain in order to have less deformation and strong resistance to shock.
Read More
Tebineri (Hand-building)
- Ceramics
- Technique
A forming method using only fingers. The most primitive way of forming. Although it is not suitable for elaborate work, it is good for expressing rustic beauty.
Read More
Tenmoku
- Ceramics
- Classification
The name Tenmoku refers to black glazed tea bowls in general. It is said that the name comes from the fact that it was brought back by a Japanese Zen monk who visited Tenmoku (天目Tiān mù in Mandarin, or “Heaven’s Eye” in English) Mountain in Zhejiang Province, China in the Kamakura period (1185 – 1333). Typical shapes include Tenmoku, Asagao (morning glory), and Togasa (resembling an Asian conical hat). These have been produced in various parts of Japan since the early modern period.
Read More
Tensha
- Ceramics
- Technique
A technique in which patterns are pre-printed using ceramic-specific paints on tensha (literally, “transcription” or “transfer printing”) paper, decals, copper plates, or other materials, and the patterns then transferred to the surface of the vessel.
Read More
Togi-dashi
- Lacquerware
- Technique
A technique of applying multiple layers of colored lacquer, each of which is carefully polished with charcoal to bring out the colors of the layers beneath them.
Read More
Tokibo / Hakobi
- Other
- Others
A tool shaped like a broom. It is used when mixing or applying paints on a wood block. It is made of finely split bamboo skin, that are tied to a stick with a string.
Read More
Tokoname ware
- Ceramics
- Generic term
Stoneware made mainly in Tokoname City, Aichi Prefecture. It has the longest history among Japan’s six ancient kilns. Characterized by its iron-rich red clay which are fired using oxidising flame.
Read More
Tsuiki
- Metalwork
- Technique
A metal working technique in which gold, silver, copper, or their alloys are stretched into a sheet and formed into a three-dimensional form, utilizing the ductility and malleability of the metal.
Read More
Tsuki-ita
- Wood & Bamboo
- Others
Wood veneer made from natural wood that has been thinly shaved with a sharp blade. Tsuki-ita is applied to plywood or MDF fiberboard as a decorative facing material to create what is called “kesho-gohan,” or decorative plywood, often used for furniture and construction materials.
Read More

W

Wajima lacquerware
- Lacquerware
- Generic term
Generic name of lacquerware produced in Wajima City, Ishikawa Prefecture. Characterized by its robustness. The wood surface is reinforced with cloth and is coated with many layers of “Jinoko” which is the powder of calcined diatomaceous earth.
Read More
Wax casting
- Metalwork
- Technique
A metal casting technique that makes use of the special properties of wax. It has been widely used in Japan since the Asuka period (592 – 710). A wax mold is made by boiling beeswax or Japan wax together with pine resin and then wrapping it in clay and baking it at high temperature to create a mold. The heat melts the wax of the original mold, which then flows out (known as “dewaxing”), and the molten metal is poured in. After the metal has cooled, the mold is broken and dismantled, allowing the casting to be removed.
Read More
White porcelain
- Ceramics
- Classification
A type of porcelain made from white porcelain stone. Transparent glaze are applied and fired at high temperature by reduction firing. Developed in China, this type of ceramic came into production in Japan after the discovery of porcelain stone containing kaolin in Izumiyama, Arita in 1616.
Read More

Y

Yaki-namashi (Annealing)
- Metalwork
- Technique
The process of heating hammered and tempered metal in a fire to improve the malleability of the copper structure and make it easier to work. The repetitive hammering and annealing by which a piece will take its final shape.
Read More
Yakishime (Unglazed stoneware)
- Ceramics
- Classification
Forming clay and letting it dry before firing at high temperature as much as 1100~1400 degree Celcius without biscuit firing or glazes.
Read More
Yamanaka lacquerware
- Lacquerware
- Generic term
Generic name of lacquerware produced in the Yamanaka-Onsen area in Kaga City, Ishikawa Prefecture. This area is well known for its woodturning.
Read More
Yohen
- Ceramics
- Others
Effects that manifest on pottery in the kiln during firing. The changes are unpredictable as they are caused by the condition of the fire, oxygen or glaze.
Read More
Yohen Tenmoku
- Ceramics
- Classification
A type of Tenmoku fired at the Jian kilns in Fujian province during the Southern Song dynasty (1127-1279) in China. It is considered to be the finest example of Tenmoku, with a glossy jet black glazed tea bowl with silvery flecks like stars surrounded by blue and iridescent light. Only three bowls meet the definition of true Yohen Tenmoku: one in the collection of Seikado Bunko Art Museum (commonly known as Inaba Tenmoku), one in the collection of Fujita Museum, and one in the collection of Ryuko-in, Daitokuji Temple. All three are considered national treasures of Japan.
Read More
Yuteki Tenmoku
- Ceramics
- Classification
A type of Tenmoku fired at the Jian kilns in Fujian province during the Southern Song dynasty (1127-1279) in China. Gold and silver flecks like drops of oil appear on the jet-black glaze, with many of them spread over the entire surface of both the interior and exterior of the tea bowl. In addition to the Jian kiln, tea bowls were also fired at the Cizhou kilns in Hebei province during the Song and Yuan dynasties (1271-1367).
Read More
Yuzu-hada
- Ceramics
- Others
A condition where fine pits appear on the surface of the glaze, giving it the texture of citrus peels.
Read More

Ceramics
Generic term
Technique

A type of Mino ware first created during the Azuchi-Momoyama period (1573–1603). It is thought to have reflected the taste of Oribe Furuta, a celebrated master of the Japanese tea ceremony, and is characterized by novel shapes and patterns. It can be classified into various types depending on the glaze and technique, including the copper-green glazed So-Oribe and Ao-Oribe, as well as Aka-Oribe, Kuro-Oribe, Yahichida-Oribe, and Narumi-Oribe.

KOGEI STANDARD

NEWS

“The 118th Arita Ceramic Fair” Held for the First Time in Three Years

The 4th “MITSUI Golden Takumi Award” Ceremony

The Publication of “Discover, Acquire, Enjoy – The Appreciation of Sake Ware”: An Additional Issue of the Quarterly Journal “Honoho Geijutsu” or “The Art of Fire”

"SGHR NEW DESIGN PREVIEW 2022" – Sugahara Announces New Products for 2022

“CRAFT POINT KYOTO” – One of the Largest Event on Japanese Crafts Has Commenced

"Shigaraki” - Hiroyumi Suzuki Solo Exhibition

“Melting” - Glass Artist Takeyoshi Mitsui Solo Exhibition

Toguri Museum of Art Will Hold "The 35th Anniversary Special Exhibition of Nabeshima Ware – 200 Years Trajectory – "

"Forms that Blend Together" – Takeyoshi Mitsui Solo Exhibition

“A Cross between Traditional and Modern Times” – Lacquer Artist Takao Togashi Solo Exhibition

Yotsukawa Seisakusho

A philosophy of craftsmanship in the modern world

Hataman Touen

The tradition and dignity of Imari Nabeshima

Nakagawa Mokkougei

Wooden tubs to last 100 years

Karatsu Nanban Sake Server

Partner for a fine drink

Nezumi-Shino Tea Bowl

Kittachi Teapot with White Chara Glaze

On the Wall Mini - Art Edition

Iron-Glazed Flower Vase

Rectangle Plate, Chrysanthemum

Amber on Gray

Yohen Blue Tokkuri Sake Flask

White Tea Bowl

Hitoshi Morimoto

Shinji Terauchi

Hiroyumi Suzuki

Makoto Yamaguchi

Nami Takahashi

Takeo Suhara

Yuki Nishiyama

Takashi Baba

Noriko Tsuiki

Being unyielding, is the essence of Kogei

Motomasa & Susumu Yotsukawa

Shuji Hataishi

Noriyasu Soda